METAL LIGHTING POLES
We have a continuous manufacturing line that allows us to supply metal poles and accessories for lighting in the following modalities:
- Tapered metal poles ranging from 3.5m up to 12m, made from carbon steel sheet of the best quality.
- Heron neck metal poles
- Striped poles of length greater than 12m
- Traffic signal poles (For traffic signs and lights).
- Conic octagonal poles ranging from 4m up to 12m, made from carbon steel sheet of the best quality
- Metallic poles for surveillance cameras
- Tubular arms for luminaries of all kinds
- Straight circular poles on different dimensions
All of these among others, on top of the particular demands of our clients with the end of satisfying and exceeding their expectations.
OCTAGONAL AND CIRCULAR POLES
| Height | Diameter (Base) (mm) | Diameter (Punta) (mm) | Side Base plate (mm) | Distance between centers (mm) | Thickness motherboard (mm) | Sheet caliber | Diameter anchor (mm) | Length anchor (mm) | Cartabón |
|---|---|---|---|---|---|---|---|---|---|
| 3.5 | 114.59 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 750 | NO |
| 4 | 114.59 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 750 | NO |
| 4.5 | 114.59 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 750 | NO |
| 5 | 114.59 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 750 | NO |
| 5.5 | 114.59 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 750 | NO |
| 6 | 130.5 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 750 | NO |
| 6.5 | 130.5 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 750 | SI |
| 7 | 130.5 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 750 | SI |
| 7.5 | 136.87 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 750 | SI |
| 8 | 143.23 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 750 | SI |
| 8.5 | 143.23 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 750 | SI |
| 9 | 143.23 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 1000 | SI |
| 9.5 | 143.23 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 1000 | SI |
| 10 | 171.88 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 1000 | SI |
| 10.5 | 171.88 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 1000 | SI |
| 11 | 171.88 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 1000 | SI |
| 11.5 | 171.88 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 1000 | SI |
| 12 | 171.88 | 79.57 | 280 | 190 | 9.5 | 11 ó 12 | 19.05 | 1000 | SI |
NOTE: On poles 9m up, can be manufactured with a 1/2 “or 5/8″ or 3/4” base plate.
TUBULAR ARMS FOR LUMINAIRE OF ALL KINDS
| Length (mts) | Diameter nominal (inch) | Identification card |
|---|---|---|
| 1.2 | 2 | 30 |
| 1.5 | 2 | 30 |
| 1.8 | 2 | 30 |
| 2 | 2 | 30 |
| 2.4 | 2 | 30 |
| 1.5 | 1 1/2 | 30 |
| 1.8 | 1 1/2 | 30 |
NOTES:
- Arm with hanger or with plate for concrete pole
- Arms can be made in optional 30 or 40 ced
- We manufacture cross arms
METHODOLOGY
Our manufacturing methodology encompasses a concept of total concept of computer integrated manufacturing process (CIM-Computer Integrated Manufacturing), through a combination of procedures of CAD design, CAM engineering and programming, controlled by a quality control system which is regulated and duly certified according to the ISO (International Standardization Organization) regulations of their 9001:2015 version.
We comply with the highest national and international standards on wind resistance via joint weld reinforcement, we use MIG welding processes with the highest technology through waveform control and STT (Surface Tension Transfer), through them we obtain constant penetrations on longitudinals up to 60% on lighting poles and a 90% on distribution poles.
Our inspection systems meet the highest demands on control via non-destructive inspection, using methods such as: X-Ray, ultrasound, penetrating liquids, etc. These among others on top of the particular demands of our clients with the end of satisfy and exceed their expectations.
MACHINERY AND EQUIPMENT TECHNOLOGY
Our cutting line is completely automized; we control longitude and angle of cut with servo-controlled movement mechanisms. The folding process is realized on a curtain press equipped with 7 servo-movement axes which are controlled by a completely computerized system, manually and automatically controlled from a local HMI. The welding lines are equipped with the highest Seam-Tracker technology, and its sources count with shape, frequency and superficial tension transfer technology. This allows us to keep the residual tension deformations on the steel to a minimum.
The manipulation of raw material and finished product is realized with special hoisting equipment that can handle products that have asymmetric gravity centers.